Bristar Cautions

About Bristar Non-Explosive Demolition Agent

I. Do not use BRISTAR for other purposes besides the cracking of rocks or concrete as instructed in this brochure.

II. Rinse with water, any portion of the skin that comes in contact with BRISTAR.

III. When mixing and filling BRISTAR in holes, wear rubber gloves and safety goggles.

IV. Do not pour and leave BRISTAR in bottle or can to avoid shattering of the can or bottle.

V. Do not look directly into any holes for at least 6 hours after pouring. BRISTAR may splatter or blow out of the hole due to heat generation when temperature of material to be broken is over the temperatures found in the temperature chart.

VI. Do not use hot water.

PRECAUTION

Do not mix over one bag (5 kgs, 11b.) of BRISTAR with water at a time.
Do not use BRISTAR for other purposes besides the cracking of material.
Do not pour and leave BRISTAR in bottle or can.
Do not look directly into any holes for at least 6 hours after filling.
Use the proper type of BRISTAR.
Do not use hot water.
Wear rubber gloves and safety goggles when mixing and filling.
Rinse with water when any portion of the skin comes in contact with BRISTAR.

Demolition Technologies BRISTAR Distributors

P.O. Box 427 107 Mildred Street Greenville, AL 36037	Phone:	1-800-282-4384
	Fax:	(334) 382-7548
	Email:	info@demolitiontechnologies.com