About Bristar Non-Explosive Demolition Agent

Container and Storage

BRISTAR is packed in 4 anti-moisture bags of 5 kg (11 lb.) each and then placed in a water proofed carton with a total weight of approximately 20 kg (44 lb.).

I. Although BRISTAR is packed in anti-moisture paper bags, long storage may cause deterioration of its working ingredients. Therefore, store in a dry place and use it as soon as possible.

II. When storing, do not place the bags of BRISTAR directly on floor, put them on a pallet and keep in a dry warehouse etc. BRISTAR, stored in this manner, can be effectively used for about 1 year.

III. BRISTAR should be unpacked before use.

IV. When storing the portion of BRISTAR remaining after use, push the air out of the bag, then seal with gum tape and use as soon as possible. However, as it may get exposed to moisture there is a risk of BRISTAR losing its effectiveness once the bag has been opened.

V. If you receive broken bags of BRISTAR, they may not work due to chance of moisture absorption.

 

 

Demolition Technologies BRISTAR Distributors
P.O. Box 427
107 Mildred Street
Greenville, AL 36037
Phone: 1-800-282-4384
Fax: (334) 382-7548 
Email: info@demolitiontechnologies.com



 
About Bristar Non-Explosive Demolition Agent
Bristar Technical information
Properties Of BRISTAR
Fracture Mechanism
Test Breaking and Drilling
Mixing and Filling BRISTAR
Crack Formation Time
Container and Storage
BRISTAR Caution
Demolition Design for Rock
Demolition Design for Concrete
MSDS Sheet
BRISTAR Order Requests